PRUDUCT

  • LOCATION:Fixed gas detector

  • Fixed gas detector

JT-AS10 Household combustible gas detector

 JT-AS10   Household combustible gas detector



Product brief introduction


     JT-AS10 household combustible gas detector, using high quality gas sensor, combined with advanced electronic technology and sophisticated technology and made. When the concentration of gas reaches the alarm set value, the detector will send out sound and light alarm signals and start the linkage device: such as opening ventilation or cutting off the air source. At the same time, alarm information can be uploaded to the cloud platform through NB wireless network, and the platform will push messages to mobile phones and other terminal devices, effectively avoiding the occurrence of fire, explosion, poisoning and other malignant accidents.This product is applicable to non-explosion-proof places such as home, hotel, restaurant,computer room, bank, store, museum, library, office building and so on. 


Product features 


♦ High performance, low power processor.

♦ High sensitivity and long life semiconductor gas sensor. 

♦Software and hardware filtering technology is adopted to improve the   anti-interference ability of gas detector.

♦ If gas leakage is detected, the solenoid valve can be directly driven to cut off the gas supply and start the fan at the same time to discharge the leakage gas.

♦ Alarm situation can be uploaded to the platform through NB wireless network, and the platform will push messages to mobile phones and other terminal devices to achieve remote monitoring and control.



Technical Parameters


★Gas detectionMethane

★Detection principle:Semiconductor type

★Detection range:0~100%LEL

★Sample method:Free diffusion type

★Sensor life: Five years

★Response time: ≤30秒

★Recovery time: ≤30秒

★Working voltage: AC220V+/-15%  50Hz

★Alarm type: sound and light alarm

★Alarm loudness: ≥70dB

★ Display mode: Three LED indicators, power, fault and alarm

★ Button: A self-check button

★ Output signal:  

           A set of 12V pulse output (Can be equipped with 12V  DC pulse gas solenoid valve)

           A set of relay contact outputs(contact capacity:1.5A/220VAC、1.5A/30VDCThe active passive is set through the jumper cap)

★ Internet:NB_IOT

★ Case Material: ABS plastic

★ Dimension:122mm×72mm×44.6mm

★ Weight:200g

★ Operation place: Non-explosion-proof, indoor use

★ Ambient temperature:(0~55)oC

★ Relative humidity:(10~95)%RH(No condensation)







LAST: NOTHING
NEXT: NOTHING